📝 SummarXiv

Abstract

Reverse engineering can be used to derive a 3D model of an existing physical part when such a model is not readily available. For parts that will be fabricated with subtractive and formative manufacturing processes, existing reverse engineering techniques can be readily applied, but parts produced with additive manufacturing can present new challenges due to the high level of process-induced distortions and unique part attributes. This paper introduces an integrated 3D scanning and process simulation data-driven framework to minimize distortions of reverse-engineered additively manufactured components. This framework employs iterative finite element simulations to predict geometric distortions to minimize errors between the predicted and measured geometrical deviations of the key dimensional characteristics of the part. The effectiveness of this approach is then demonstrated by reverse engineering two Inconel-718 components manufactured using laser powder bed fusion additive manufacturing. This paper presents a remanufacturing process that combines reverse engineering and additive manufacturing, leveraging geometric feature-based part compensation through process simulation. Our approach can generate both compensated STL and parametric CAD models, eliminating laborious experimentation during reverse engineering. We evaluate the merits of STL-based and CAD-based approaches by quantifying the errors induced at the different steps of the proposed approach and analyzing the influence of varying part geometries. Using the proposed CAD-based method, the average absolute percent error between simulation-predicted distorted dimensions and actual measured dimensions of the manufactured parts was 0.087%, with better accuracy than the STL-based method.